Mask Uniside Door Opening NOT INCLUDED
DEG Inquiry 13451 provides feedback from CCC/MOTOR on masking the door opening when refinishing the uni-side/ aperture as NOT INCLUDED. Both the labor and the
DEG Inquiry 13451 provides feedback from CCC/MOTOR on masking the door opening when refinishing the uni-side/ aperture as NOT INCLUDED. Both the labor and the
Estimating Tip- All three estimating systems. Clearing Customer Data NOT INCLUDED CCC – DEG Inquiry 20794 “After review of your concern, this is not a
Estimating Tip- Measuring Paint MIL Thickness Not included CCC DEG Inquiry 19625 “• Measuring the MIL thickness of paint is not included in the estimated
Estimating Tip: CCC/ MOTOR- Additional operations available through vehicle diagnostics section CCC users now have the ability to quickly add common ADAS calibration and programing
Estimating Tip- All three estimating systems. Use of spectrophotometer camera NOT INCLUDED CCC – DEG Inquiry 20714 “After review of the concern, “spectrophotometer reading” or
Estimating Tip: Mitchell- Introduction to Mitchell Cloud Estimating (MCE) New users of Mitchell Cloud Estimating (MCE) can watch an introduction of the estimating system if
Estimating Tip: CCC/ MOTOR- Removing truck bedDEG Inquiry 20436 response from MOTOR:• The setting of the Pick Up Box Assembly on a stand and the
Estimating Tip- All three estimating systems. Extending clear to nearest break point Clear coat application to the nearest breaking point may be a necessary operation
Estimating Tip: Mitchell- “Labor Note” Some graphics may have additional “Labor Notes” that are specific to all the components in the graphics vs an individual
Estimating Tip: CCC/ MOTOR- Pressing out damage bearing NOT INCLUDED DEG Inquiry 20533 response from MOTORS “The estimated work time applied to the Hub &