Search DEG
Subscribe To Our Weekly Email
"*" indicates required fields
Search DEG
Subscribe To Our Weekly Email
"*" indicates required fields
Estimate Tip – Solera Qapter (Audatex) Three-Stage Spray out & Let Down Panels
According to the Solera Qapter DBRM Section 4-4 Refinish Guidelines, three-stage refinish allows for 2 spray out/let down panels; included as part…
Estimate Tip – Mitchell – Masking Glass
DEG Inquiry 38709 provides feedback from Mitchell regarding glass masking operations – sometimes referred to as “roping” when using lift tape to…
Estimate Tip – CCC – Damaged or Non-Reusable Moldings and Fasteners
DEG Inquiry 38549 provides feedback from MOTOR regarding components that may be damaged during removal, even with proper care is applied. According…
Estimate Tip – Solera Qapter – Changing Zone Selection
Solera Qapter users can quickly change the “Zone Selection” screen by using the left and right buttons on the top left corner…
Estimate Tip – Mitchell – Side Body Refinish
When repair or replacement of side body panel (Quarter panels) needing refinish, additional labor may require extending basecoat / clear coat into…
Estimate Tip – CCC – R&I Headlights does not include Aim Lights
Recent DEG Inquiry 38543 features feedback from MOTOR that establishes “anytime the headlamp assembly is removed from the vehicle the ’Aim Headlamps’…
Estimate Tip – Mitchell – Refn Backside Door Outer Panel
DEG Inquiry 18059 provided feedback for second color consideration when refinishing backside & inside of outer door panel. “If the repairer needs…
Estimate Tip – Solera Qapter (Audatex) – Corrosion Protection
Solera Qapter DBRM page 146 Section 4-4 Refinish guidelines states “Corrosion protection is the process and materials used to prevent corrosion.” End…