Estimate Tip – Mitchell – Vehicle with multiple colors

November 18, 2026
Danny

Certain vehicles and repair scenarios require multiple color formulas due to exterior trim, moldings, flares, or lower cladding finished in a contrasting color from the primary body.

Mitchell Cloud Estimating (MCE) does not automatically account for these secondary finish setups. Because standard database refinish logic assumes parts are finished in the primary body color during a single paint operation, these scenarios require an on-the-spot evaluation for the duplicated labor and material efforts involved.

Key Considerations for the Repair Plan:

  • Duplicate Setup & Mixing: Published refinish times do not include formulating, retrieving toner formulas for, or mixing separate secondary colors with required solvents, reducers, and hardeners.
  • Equipment & Booth Operations: Account for dedicated spray gun setups, gun cleaning cycles between formulas, separate flash times, and additional booth bake cycles.
  • Fine-Line Masking & Protection: Factor in perimeter taping, back-masking, or bagging required to protect primary body panels or contrasting trim from overspray.
  • Clear Coat Application: Verify whether the secondary components require a separate matte, satin, or semi-gloss clear coat mix, which constitutes an additional refinish setup.
  • Refinish Overlap Logic: When transitioning between different colors, review system overlap deductions. Overlap should not automatically deduct between the last component finished in the primary body color and the first component finished in the secondary color sequence, as they represent distinct refinish operations. Manual adjustment may be necessary.